1. Fusion Group Limited /
  2. Product finder

ELECTROFUSION TAPPING VALVE SADDLE - UNDER CLAMP

PE100, 4.0mm Fusamatic (Automatic) Pin, 63mm Outlet, 63 - 225mm Body

Fusion Sales and Product Enquiries

Contact

Fusion

Sales and Product Enquiries

Electrofusion tapping valve saddle with under clamp (63mm Outlet, 63 - 225mm Body) for gas, water, wastewater, mining and irrigation applications. 4.0mm Fusamatic pin, PE100, Water PN16, Gas 10 Bar. Temperature range on electrofusion fittings -10°C / +40°C.

Electrofusion tapping valve saddle with under clamp (63mm Outlet, 63 - 225mm Body) and 4.0mm Fusamatic (automatic) pin. For gas, water, wastewater, mining and irrigation applications. All fittings are manufactured using virgin PE100 black polyethylene. Tapping valve saddles are specialised fittings used to add a new branch connection with an integral isolation valve to an existing pipeline, without disrupting the main flow.

Variant 1233/01-001
Material: Polyethylene (PE)
DN: DN63 - DN225
PN: PN 16

Features

  • All fittings are manufactured using virgin PE100 black polyethylene.
  • Water PN16 / Gas 10 Bar (All stated technical specifications depend on PE pipe welded to and any local pipeline pressure regulations).
  • Fusamatic pin 4.0mm (automatic method to ensure correct welding parameters are used).
  • 14mm AF drive shaft provides a method of driving the integral cutter through the mains pipe wall in addition to actuating the valve once the cut through operation has been carried out (maximum permitted cutting torque 120Nm).
  • Moulded-in brass sleeve design with integrated O-rings - provide a gas/water tight seal for both dead and live mains.
  • Integrated brass bodied valve provides a reusable shutoff point - eliminating the requirement for an additional in-line valve within the service off-take (maximum permitted torque for valve operation 90Nm).
  • Double spigot outlet - ample spigot length to cut off a coupler/reducer and fuse a second fitting.
  • Saddle and fusion mat designed to minimise joint cycle times.
  • Under clamp designed to snap quickly in place, saves time and avoids the need for specialist tooling.
  • Rising pin fusion indicator allows for easy monitoring of the fusion process.
  • Manual welding parameters moulded into the body of the fitting for easy reference.
  • All electrofusion fittings are individually numbered for precise tracking.
  • Permanent batch number - clearly marked for quality control.
  • Barcode and QR code enables full traceability of each fitting back to raw materials and critical components.
  • Welding barcode compliant with ISO 13950 and traceability barcode compliant with ISO 12176-4.
  • Fusamatic branded.

Downloads

Datasheet

Reference nos. and dimensions:

Scroll for more info
Ref. no. Fitting Size
mm		 L10
mm		 H
mm		 H1
mm		 W10
mm		 SDR Range
 Fusion Time
Secs		 Cooling Time
Mins		 Theoretical
weight / kg
TVSBKHFA63X63U 63X63 165 250 62 147 11 - 17.6 100 10 2.29
TVSBKHFA75X63U 75X63 165 250 68 147 11 - 17.6 120 10 2.4
TVSBKHFA90X63U 90X63 165 250 78 147 11 - 17.6 100 10 2.33
TVSBKHFA110X63U 110X63 165 269 103 147 11 - 17.6 100 10 2.49
TVSBKHFA125X63U 125X63 165 269 112 147 11 - 17.6 100 10 2.5
TVSBKHFA160X63U 160X63 165 272 137 147 11 - 17.6 100 10 2.53
TVSBKHFA180X63U 180X63 165 272 147 147 11 - 17.6 100 10 2.55
TVSBKHFA200X63U 200X63 165 272 157 147 11 - 17.6 100 10 2.55
TVSBKHFA225X63U 225X63 165 272 169 147 11 - 17.6 100 10 2.59
2D/3D drawings
Enquiry
Scroll for more info

Components

Standards

  • Fusion have numerous local and international product approvals as well as ISO 9001 and ISO 29001 quality management system approvals. 

    Fusamatic branded electrofusion fittings are designed and manufactured to the product standards listed (other product certificates are available upon request).

  • EN ISO 15494, EN 12201-3, EN 1555-3
  • ISO 4437-3, ISO 4427-3

    Note: Regional variations may apply to some of the standards referenced. Please contact us for further details.

0 Files In the package