Flextee Tapping Tee

Sizes
Sizes range from d63 – 180mm with 20, 25 and 32mm outlets.

Pressure ratings
All Flextee tapping tees are manufactured in virgin PE100 black polyethylene and pressure rated up to 16 bar for water applications and 10 bar for gas applications.

Specifications
All Flextee tapping tees are tested and have 3rd party approval against the following standards;

1. EN 12201-3
2. EN 1555-3

Features and benefits

• Designed to provide a solution to the jointing of tapping tees to oval and coiled pipe – enabling secure and robust quality joints everytime.
• Flexible body and electrofusion mat which conforms to the shape of the pipe – quality joints can be achieved without re-rounding clamps.
• Thread profile on the Flextee’s internal cutting mechanism reduces the level of torque required to drive the cutter through the body of the main.
• Corrosion resistant brass terminal pins.
• Cutter blades manufactured from corrosion resistant stainless steel.
• To promote joint quality, all fusion elements are coated with enamel before being moulded into the fitting body.

The Good Guide to Electrofusion Saddle Jointing using the Flextee Tapping Tee, provides basic information which enables operatives to understand best practice installation techniques.

The information provided in the video is not binding and may be subject to modifications.  This video is supplied as a guidance only.  The welding operator is responsible for ensuring all work is performed exclusively by trained and competent personnel and in compliance with both national and international rules and guidelines for electrofusion installation.