Multiseal Tapping Tee

PRODUCT FOCUS – Fusamatic Multiseal Tapping Tee

Stackload or Underclamp for Gas and Water

Multiseal Tapping Tees deliver security, safety, simplicity and speed at the point of installation.

Sizes
Sizes range from d40 – 355mm with 20, 25, 32, 40, 50 and 63mm outlets.

Pressure ratings
All Multiseal tapping tees are manufactured in PE100 black polyethylene and pressure rated up to 16 bar for water applications and 10 bar for gas applications (for UK gas applications (GIS PL2 Part 4) the maximum operating pressure can be up to 5.5 bar (Class B) or 7 bar (Class C)).

Specifications
All Multiseal tapping tees are tested and have 3rd party approval against the following standards;

  1. EN 12201-3
  2. EN 1555-3
  3. GIS/PL2-4 (Certain sizes only – contact us for further details).

All Multiseal tapping tees are manufactured in the UK.

Features and benefits

  • Multiseal saddle and fusion mat have been designed to minimise joint cycle times.
  • Thread profile on the Multiseal’s internal cutting mechanism reduces the level of torque required to drive the cutter through the body of the main.
  • Corrosion resistant brass terminal pins.
  • Cutter blades manufactured from corrosion resistant stainless steel.
  • To promote joint quality, all fusion elements are coated with enamel before being moulded into the fitting body.
Product Literature
Multiseal Tapping Tee
Size 1.3 MB
Download: Multiseal-Leaflet-June-2018.pdf
   
Multiseal Tapping Tee Overview
Size 879.7 KB
Download: Multiseal-Overview-Leaflet-June-2018.pdf

The Good Guide to Electrofusion Jointing
Size 1.1 MB
Download: The-Good-Guide-to-Electrofusion-Jointing-Low-Res.pdf
   
Global PE Product Offer - For Gas and Water
Size 11.0 MB
Download: Fusion-Global-PE-Product-Offer-Final-October-low-res.pdf